Forgot your password?
Member benefits:
Set this table up anywhere and you'll be on your way to sun-bleached sand surrounded by turquoise waters.
Step 1: Adjust the Surfboard
Step 2: Attach the Velcro
Step 3: Adhere Surfboard
Produced by Todd MooreWritten by Rachael Liska
Place the bottom of the surfboard on the top of the table and adjust it side to side and back and forth to ensure the board is centered. Use a level to make sure the surfboard is level. While a friend holds the board in place, get under it and draw a line around the bottom of the board wherever it meets the surface of the table.
Flip the surfboard onto the floor so its underside is facing up. Ask a friend to flip over table so it's hovering just above board, while you peel off film from the female side of tape. Press together firmly, then carefully turn back over. Surf's up!