Forgot your password?
Member benefits:
Step 1: Cut the Plywood
Step 2: Cut the Slots
Step 3: Interlock the Pieces
Measure the height of the drawer and cut plywood strips 1/2-in. narrower than this dimension. Determine the desired width and length of your divider unit based on the size of your drawer, and cut the plywood strips to length.
Determine the best size for your "cubbies," then mark the plywood where the pieces will intersect. Use a jigsaw to cut 1/4-in.-wide slots to half the depth of the dividers.
Interlock the pieces, then use glue and 1/2-in. brads to secure the outer framework of the dividers. Let glue dry for 1 hour, then set the unit in the drawer. Load it up.